U Brands Glass Dry Erase Board, 47"x35", White Frosted Surface With Silver Grommets, Frameless, Includes Marker

I work from home and part of my work is presenting design solutions over the web. Sometimes, that work is presenting live whiteboard solutions.Most whiteboards are horrible, flimsy and ugly. They also have a reflectivity that results in glare on camera, which you just don’t expect and wind up having to compensate for with lighting and umbrellas. So, a glass board with the right lighting can surprise you.First, they’re reasonably light. I don’t recommend doing a one-person installation. That’s what I did and wound up with a 2 degree offset on the installation which annoys me and I’ll wind up fixing it. Go two-person, use a carpenter’s level and be happy.On camera, this has a great soft look. Make sure to use markers designed for a glass whiteboard and not a regular whiteboard or you’ll work a bit harder to keep it clean. Microfiber cloths clean this really well. Green markers don’t show up as well on camera.The mount system is actually very good. What you’ll likely find useful is to make a template on paper. What I mean by that is to lay out a grid of copy paper on a table and tape them all together. Lay the board on top and ensure the top is level to the top of the paper and draw the entire top edge so you have the line for the level.Then, using a marker tap into the four holes where the mount posts go. Take this sheet and put it up on the wall you’re going to install it. Ensure (several times, please) the line you drew is completely level at both ends. You’ll need a drill to install this, a power driver will help, too.Drill one hole at a time and verify the position each time with the white board. The kit is very good quality. As long as you successfully drill either two holes that are equally across the top or on the diagonal, you’ll install this correctly.

Overall I really like this board an it looks much nicer than a standard white board. The install was pretty easy, but the included wall anchors are crap.I was able to put two of the fasteners into a stud so I only needed two wall anchors. The ones it comes with are terrible so I ended up going to the hardware store to buy two toggle bolts for a total of $1.50. Make sure you bring one of the mounts with you to ensure you get toggle bolts with screw heads small enough to fit inside the mount. Once I had those, install was smooth sailing. I thought it was missing some of the rubber gaskets that go on either side of the glass but they are actually two thin gaskets stuck together that you have to pull apart.Even with the poor wall anchor quality I gave it 5 stars as it's an easy fix and the value is still excellent at the price I paid ($44.50).

Love how clean and crisp this looks in my office!

Excellent dry erase glass board...it can be decorated with Rust-Oleum spray enamel, and paint mask film, but allow 10 days daytime before removing the mask, instead of the 24 hours as indicated by Rust-Oleum for a full cure .. otherwise the paint will peel.Note: I somehow lost a single silicone washer during installation, and wanted to order some from the company, but they sent me a replacement set at no charge, and received them in about 4 days...thanks Umount.

This glass whiteboard makes a fine addition to my home office. It's sturdy and solid. Dry erase markers write on it well and erase easily (I use microfiber cloths to clean my whiteboards). You can hang it vertically or horizontally and you just attach the tray to whatever side is the bottom. The tray attachment relies on little soft pads to secure it in place, sort of like a cork. It works well, but I worry what will happen if I put any weight on the tray.It was difficult to hang alone, so I suggest calling a friend over to help hold it in place while you pencil the holes. And as others have said, you really need to get the holes drilled dead on center. You can see from one of my pics what happens when you don't. It doesn't quite sit flush.Two things would have made the hanging experience better: a paper stencil that you can tape to the wall to line up and drill the holes, and some indication as to the size of the molly bolts so you know which drill bit to use.

It's beautiful and perfect for our family brain board!! Pretty and functional!!It's exactly what we needed size wise and we can customize it with magnets for different things.

It was very easy to mount and has stayed sturdy! Amazing to write on and easily erases!!

It was harder to hang than I thought, meaning the holes have to be drilled with the correct spacing otherwise the screws wont thread through the glass board. Two people are needed to hang it. Regular whiteboard markers don't show up as well. Cleans nicely and no staining.